自动化平台 | 产品库 | 品牌库 | 企业库
Omega工业测量（中国）
当前位置：自动化网>Omega工业测量（中国）门户>产品中心>TXDIN1600S
TXDIN1600S

TXDIN1600S

分  类：压力传感器

品  牌：欧米茄

厂  商：Omega工业测量（中国）

型  号：TXDIN1600S

相关行业：

发布时间：2019-12-19 16:38 浏览人数：人

最新产品

    产品详情
    参数
    包装
    • Suitable for Load Cell/Strain Gauge Applications
    • Universal Current, Bipolar Voltage Outputs
    • Input Range 0.2 to 7.5 MV/V, 5 V Excitation
    • Powered 10 to 32 Vac or 10 to 48 Vdc Supply
    • 2 to 6 Point Calibration with Active Set Option
    • Remote Tare, Front Panel Push Button Configuration
    • USB Programmable

      • The TXDIN1600S is a “smart” powered bridge amplifier for use with strain gauges or load cell signals. The product has a built-in capability to scale the input signal to a process value while the output stage offers either voltage, bipolar voltage or active/passive current re-transmission signals.

      The TXDIN1600S requires anAC/DC power supply that will operate in the range (10 to 48) Vdc and 10 to 32 Vac making the device ideal for battery operation. An additional volt free contact input is available for tare setting using a remote switch. The high precision input stage of the device allows for a bridge excitation voltage of 5 Vdc to be used as opposed to the traditional 10 Vdc. This reduces the power requirement for the bridge supply and up to four bridges (cells) may be connected to the input.

      The device is provided with two front panel push buttons that can be configured to perform one of two functions or be disabled.Set as function 1, the buttons allow the user to push button configure the output range at high and low scale against a live input signal, set as function 2, the buttons allow the operator to trim the output at high and low scale. The device uses ratio metric measurement to obtain high stability.

      The product uses a USB port for configuration, together with a simple to use menu driven software configuration tool, allowing the user to take advantage of the product’s comprehensive specification. Additionally, the user may read live process data when connected to the PC, allowing for offset and span calibration.

      If configuration is not specified at the time of order, the product will be shipped with the default range 2 mV/V input, 4 to 20 mA output.

      Specifications
      Bridge Input
      Full Range: -7.6 to 7.6 mV/V (-38 to 38) mV at5V excitation
      Type: Four wire radiometric
      Drift: < ± 0.05%
      Linearity: ± 0.01%
      Update: Selectable, 10 or 80 SPS (samples per second)
      Bridge Excitation
      Voltage: 5 Volts DC ± 0.1 V @ 59 mA
      Bridge Impedance: Total 85 to 10000 Ω (operates with four350 Ω cell in parallel)
      Tare Input
      Type Remote volt free contact, up to 10 meter distance
      Output Current
      Current Source: Range (0 to 21.5) mA, max load 750 Ω
      Current Sink: Range 0 to 21.5 mA, supply 10 to 30 Vdc,voltage effect 0.2 uA/V
      Accuracy: (mA out/2000) or 5 uA whichever is the greater,drift 1 uA/°C
      Output Voltage
      Range: 0 to 10.1 V or -10.1 to 10.1 V, accuracy ± 5 mV
      Current Drive: ± 2 mA, min load 5000 Ω @ 10 V
      Push Button Configuration
      Type: Independent “Low” “High” front panel push buttonsallow user to manuallyset low and high output points
      Supply
      Range: 10 to 48 Vdc, 10 to 32 Vac protected by internal 500mA resettable fuse
      Power: < 1 W full power
      General
      Isolation: Supply to input to output 500 Vdc
      Indication: LED, green when output -0.1 to 100.1%,all else red
      User Interface
      Type: USB 2.0
      Baud rate: 19,200 baud
      Equipment: PC running Windows XP or later, USB cable.
      User Interface Functions
      Calibration Scaling: (2 to 6) points signal against process
      Filter: (1 to 20) seconds to reach 70% of final value
      Tare: Remote set tare offset with programmable userset point
      Active Calibration: Active calibration against live load cell
      Process Units: 4 characters
      Tag Number: 20 characters
      Process Output: Process output range
      Signal Output: Select type, signal range
      Active Scaling Output: Set output process range againstactive sensor input
      Sensor Information: Model, sensitivity and balance
      Environment
      Operating Ambient: -30 to 70°C (-22 to 158ºF);10 to 90%RH (non condensing)
      Storage Ambient: -30 to 70°C (-22 to 158ºF);10 to 90%RH (non condensing)
      Configuration Ambient: 10 to 30°C (50 to 86ºF)
      Installation Enclosure: DIN rail enclosure offeringProtection ≥ IP65
      Approvals
      CE: BS EN 61326
      Mechanical
      Style DIN 43880, color grey, material Polyimide 6.6
      Weight: < 70 g
      Terminals 2.5 mm (0.10") maximum



























































    暂无内容提供
    暂无内容提供

    联系方式

    中国自动化网安全提示，在购买供应商商品时，请一定要先审核好企业信息是否真实，谨防网上诈骗。
    公司名称：Omega工业测量（中国）
    联系人： 王先生
    联系电话：02161973664
    手机号：
    传 真：
    电子信箱：kevin.wang@cn.omega.com
    公司网站：http://cn.omega.com
    公司地址：上海市宜山路1698号102单元
    留言反馈
    • 评价：

    • 关于：

    • 联系人：

    • 联系电话：

    • 联系邮箱：

    • 需求意向：

    • 验证码：

      看不清楚？

    产品分类

    热门产品

    网友反馈

    • 王莹: 在2021/5/22 11:20:43留言
    • 留言内容: 产品名称：热电偶 规格型号：KMQXL-032U-12 品牌：OMEGA 数量：1032
    • 柴宾: 在2019/6/25 14:33:54留言
    • 留言内容: 实验室用
    • 万: 在2017/7/25 16:01:36留言
    • 留言内容: 压差传感器：50psi，px409-050dwu5v 1只 压力传感器：10000Psi，0-5V，PX309系列，接头类型1/4” NPT 1只 压力传感器：2000psi,0-5V,PX409系列，接头类型是1/4” NPT 2只
    • 袁先生: 在2017/4/10 14:46:33留言
    • 留言内容: 需要在滑阀的阀芯末端接上该传感器，反映出滑阀在工作中阀芯所受力的情况
    • 王沛: 在2016/8/28 19:30:28留言
    • 留言内容: 购买温度记录器和热电偶

    公司名称：Omega工业测量（中国）-OMEGA

    公司地址：上海市宜山路1698号102单元 联系电话：02161973664

    版权所有：Omega工业测量（中国）    技术支持：中国自动化网(www.ca800.com)
    服务中心：0755-82912455 Email:service@ca800.com 商务洽谈：0755-82912455 Email:ad@ca800.com 广告垂询：18025374346
    • 在线咨询
    X
    下载企业APP

    成为企业会员免费生成APP!