自动化平台 | 产品库 | 品牌库 | 企业库
Omega工业测量（中国）
当前位置：自动化网>Omega工业测量（中国）门户>产品中心>OM-USB-2404-UI
OM-USB-2404-UI

OM-USB-2404-UI

分  类：测量测试仪器

品  牌：欧米茄

厂  商：Omega工业测量（中国）

型  号：OM-USB-2404-UI

相关行业：

发布时间：2019-12-19 16:50 浏览人数：人

最新产品

    产品详情
    参数
    包装
    • 4 Channels of Universal Analog Input
    • 24-Bit Resolution
    • Measures: Voltage (±125 mV, ±1V, ±4V, ±15V, ±60V), Current (±25 mA), Thermocouples (J, K, T, E, R, S, N, B), RTDs (Pt100, Pt1000, 3- and 4-Wire), Resistance (2- and 4-Wire), and Bridge-Based Sensors (Quarter-, Half-, and Full-Bridge)
    • Simultaneous Sampling at Up to 100 S/s Per Channel
    • 250 Vrms Channel-to-Channel and Channel-to-Ground Isolation
    • Built-In Thermistor for Cold-Junction Compensation (CJC)
    • Six-Position Input Screw Terminal Allows Different Measurement Types to be Performed On Each Channel

      • The new OM-USB-2404-UI provides four channelsof 24-bit universal analog input with integrated signalconditioning. The device can be used to measure avariety of sensor types such as RTDs, thermocouples,load cells, and other powered sensors. The fourchannels are individually configurable, so a differentmeasurement type can be performed on each channel.All channels are measured simultaneously at up to100 S/s per channel.

      The OM-USB-2404-UI can performthe following measurements:• Voltage• Current• Thermocouple• RTD (3- and 4-wire)• Resistance (2- and 4-wire)• Bridge-based sensors (quarter-, half-, and full-bridge)Measurement ranges vary for each type ofmeasurement (see PDF for complete specifications).

      The device features a built-in current and voltageexcitation. The excitation circuit is protected fromovercurrent and overvoltage fault conditions. Eachchannel also has a built-in thermistor for cold-junctioncompensation (CJC) calculations when measuringthermocouples. An analog pre-filter removes noisethat may be present in the signals prior to conversion.

      With 250 Vac channel-to-channel and channel-to-groundisolation, the OM-USB-2404-UI protects theindividual channels and connected computer andensures a reliable data stream. Each channel has adetachable six-position screw terminal block for fieldwiring connections.

      The OM-USB-2404-UI ships with a 2 m (6') USBcable and is powered by the 5V USB supply fromyour computer. No external power is required.

      The OM-USB-2404-UI is a USB 2.0 high-speed devicethat is supported under popular Microsoft Windows®operating systems. The OM-USB-2404-UI is fullycompatible with both USB 1.1 and USB 2.0 ports.

      SoftwareThe OM-USB-2404-UI module ships with animpressive array of software, including the newTracerDAQ®, a full-featured, out-of-the-box datalogging, viewing, and analysis application. Driversupport and detailed example programs are includedfor Universal Library programming libraries forMicrosoft® Visual Studio® programming languages, andother languages, including DASYLab®, and ULx for NILabVIEW® (comprehensive library of Vls and exampleprograms compatible with 32-bit and 64-bit LabVIEWv8.5 through 2013) and InstaCal™ installation,calibration and test utility-powerful solutions forprogrammers and nonprogrammers alike. Thesemodules operate under Microsoft Windows® XP(32-bit only) and VISTA/7/8 (32-bit and 64-bit)operating systems.

      The OM-USB-2404-UI data acquisition module issupplied with TracerDAQ software which is a collectionof four virtual instrument applications used tographically display and store input data and generateoutput signals:
          • Strip Chart—Log and graph values acquired from analog inputs, digital inputs, temperature inputs and counter inputs
          • Oscilloscope—Display values acquired from analog inputs
          • Function Generator—Generate waveforms for analog outputs
          • Rate Generator—Generate waveforms for counter outputs
      TracerDAQ PRO is an enhanced version of TracerDAQ.A comparison of some of the features included inTracerDAQ vs TracerDAQ PRO is shown on the PDF.

      SPECIFICATIONS
      ANALOG INPUT
      Number of Channels: 4
      A/D Converter Resolution: 24-bit
      A/D Converter Type: Delta-Sigma with analog pre-filtering
      Sampling Mode: Simultaneous
      TEDS Sensor Type Supported: IEEE 1451.4 TEDS Class II (interface)
      Input Mode: Voltage, current, resistance (2- and 4-wire), RTD (3- and 4-wire), thermocouple, quarter-bridge, half-bridge, full-bridge
      Conversion Time (No channels in TC mode)
          High Speed: 10 ms for all channels
          Best 60 Hz Rejection: 110 ms for all channels
          Best 50 Hz Rejection: 130 ms for all channels
          High Resolution: 500 ms for all channels
      Conversion Time (One or More Channels in TC Mode)
          High Speed: 20 ms for all channels
          Best 60 Hz Rejection: 120 ms for all channels
          Best 50 Hz Rejection: 140 ms for all channels
          High Resolution: 510 ms for all channels
      Overvoltage Protection
          Terminals 1 and 2: ±30V
          Terminals 3 Through 6, Across any Combination: ±60V
      Input Impedance
          Voltage Mode (±60V, ±15V, ±4V): 1 MΩ
          Current Mode: <40 Ω
          All Other Modes: >1GΩ
      Input Bias Current: <1nA
      Integral Non-Linearity (INL): ±15 ppm
      Common Mode Rejection Ratio (CMRR): >100 dB
      Normal Mode Rejection Ratio (NMRR)
          Best 60 Hz Rejection: 90 dB at 60 Hz
          Best 50 Hz Rejection: 80 dB at 50 Hz
          High Resolution: 65 dB at 50 Hz and 60 Hz

      GENERAL
      Operating Temperature Range: 0 to 60ºC(32 to 140ºF), 10 to 90% RH non-condensing
      Storage Temperature Range: -40 to 85ºC(-40 to 185ºF), 5 to 95% RH non-condensing
      Communications: USB 2.0 Hi-Speed mode (480 Mbps)is recommended; otherwise USB 1.1 full-speed mode(12 Mbps)
      Current Consumption from USB: 500 mA, maximum
      Channel-to-Earth Ground Isolation
          Continuous: 250 Vrms (measurement categoryII for measurements performed on circuits directly
          connected to the electrical distribution system)
          Withstand: 2300 Vrms (verified by a 5 seconddielectric withstand test)
      Channel-to-Channel Isolation
          Continuous: 250 Vrms (measurement categoryII for measurements performed on circuits directly
          connected to the electrical distribution system)
          Withstand: 1390 Vrms (verified by a 5 seconddielectric withstand test)
      Signal I/O Connector: 6-position screw terminals
      Screw terminal Wiring: 18 to 28 AWG copper conductorwire with 7 mm (0.28") of insulation stripped from the end
      Maximum Altitude: 2000 m (6562')
      Dimensions: 134 L x 143 W x 39 mm H (5.27 x 5.64 x 1.54")
      Weight: 567 g (1.25 lb)









    暂无内容提供
    暂无内容提供

    联系方式

    中国自动化网安全提示，在购买供应商商品时，请一定要先审核好企业信息是否真实，谨防网上诈骗。
    公司名称：Omega工业测量（中国）
    联系人： 王先生
    联系电话：02161973664
    手机号：
    传 真：
    电子信箱：kevin.wang@cn.omega.com
    公司网站：http://cn.omega.com
    公司地址：上海市宜山路1698号102单元
    留言反馈
    • 评价：

    • 关于：

    • 联系人：

    • 联系电话：

    • 联系邮箱：

    • 需求意向：

    • 验证码：

      看不清楚？

    产品分类

    热门产品

    网友反馈

    • 王莹: 在2021/5/22 11:20:43留言
    • 留言内容: 产品名称：热电偶 规格型号：KMQXL-032U-12 品牌：OMEGA 数量：1032
    • 柴宾: 在2019/6/25 14:33:54留言
    • 留言内容: 实验室用
    • 万: 在2017/7/25 16:01:36留言
    • 留言内容: 压差传感器：50psi，px409-050dwu5v 1只 压力传感器：10000Psi，0-5V，PX309系列，接头类型1/4” NPT 1只 压力传感器：2000psi,0-5V,PX409系列，接头类型是1/4” NPT 2只
    • 袁先生: 在2017/4/10 14:46:33留言
    • 留言内容: 需要在滑阀的阀芯末端接上该传感器，反映出滑阀在工作中阀芯所受力的情况
    • 王沛: 在2016/8/28 19:30:28留言
    • 留言内容: 购买温度记录器和热电偶

    公司名称：Omega工业测量（中国）-OMEGA

    公司地址：上海市宜山路1698号102单元 联系电话：02161973664

    版权所有：Omega工业测量（中国）    技术支持：中国自动化网(www.ca800.com)
    服务中心：0755-82912455 Email:service@ca800.com 商务洽谈：0755-82912455 Email:ad@ca800.com 广告垂询：18025374346
    • 在线咨询
    X
    下载企业APP

    成为企业会员免费生成APP!