自动化平台 | 产品库 | 品牌库 | 企业库
Omega工业测量（中国）
当前位置：自动化网>Omega工业测量（中国）门户>产品中心>WT4401
WT4401

WT4401

分  类：测量测试仪器

品  牌：欧米茄

厂  商：Omega工业测量（中国）

型  号：WT4401

相关行业：

发布时间：2019-12-19 16:52 浏览人数：人

最新产品

    产品详情
    参数
    包装
    • Precise Motor Control for Adjusting Flow Rates
    • NIST Calibration Supplied with Each Wind Tunnel
    • Highly Accurate to 1% of Reading
    • Large 4" by 4" Test Chamber
    • Highly Stable Delta Pressure Sensor and Readout Included with Each Wind Tunnel
    • Fully Instrumented
    • Optional Environmental Monitoring Package of Temp, Humidity, Barometric Pressure and Delta P Available

      • OMEGA’s state-of-the-art wind tunnel is designed to give a highly uniform flow rate over a 152 mm (6") test section. Apowerful 12 amp motor with variable speed from 0 to 10,000 RPM is adjustable to give a particular flowrate by a precise motor control unit. Each wind tunnel is supplied with an NIST traceable certificate.

      The uniform flowrate is determined by monitoring a highly repeatable differential pressure sensor which has been calibrated to each individual wind tunnel as a system. Each wind tunnel is supplied with two restrictive plates for achieving optimum low flowrates. The established differential pressure measurements versus flowrates are listed from 25 to 9000 FPM. Calibration sheets are included, which makes calibrating different flow sensors simple.

      The differential pressure measurement used to establish known flowrates will be affected by barometric pressure andtemperature conditions during testing. Depending on the probe being calibrated, humidity may also be a factor.

      OMEGA’s enhanced wind tunnel package is an environmental monitoring system that measures barometric pressure, room temperature, humidity and differential pressure. By monitoring room conditions, standard differential pressures can be converted to actual differential pressure readings to ensure accurate flowrates.

      For testing different probes, a 1/2 NPT connection is available. An assortment of compression fittings is provided tohelp mount the probe under calibration.

      High Performance Package:Same differential system as standard model, plus HX97-A temperature and humidity sensor, PX02C1-16A5T barometric sensor, PSS-D15B power supply, three DP25-E panel meters, and one DP41B-S panel meter. All equipment is enclosed in a heavy duty,air cooled, benchtop metal case. All 4 meters have 0 to 10 Vdc analog outputs.

      Wind tunnels come complete with 1/8, 3/16, 1/4 and 3/8" brass compression fittings with PTFE ferrules, two 1.52 m (5') lengths of silicone tubing, operator's manual with NIST calibration data and pressure sensor with benchtop meter.

      The intake air flow passage to this precise wind tunnel is a fiberglassconstructed baffle. The honeycomb baffle design ensures constant and evenly distributed air intake. The design minimizes turbulent air flow created by movement in front of the intake. The rear portion of the intake baffle has a profile design that keeps the stream uniform, while decreasing thearea to a 101.6 x 101.6 mm (4 x 4") cross- section.

      The test chamber is 101.6 x 101.6 x 152 mm (4 x 4 x 6") and is constructed of clear, thick-wall plastic for easy viewing. In back of this test section, the motor pulls the air through the wind tunnel. The motor and intake profiles utilize fiberglass construction, which minimizes airflow distortion.

      A monitoring package keeps track of ambient conditions as well as the precise differential pressure measurement. The monitoring sensors and instruments are all packaged inside a single powerful housing. Each sensor has an analog outputfor use with a strip chart recorder or computer data logging system. Humidity, temperature and barometric sensors areenclosed in the benchtop case for monitoring atmospheric conditions which can influence the exact air speed. The differential pressure cell is connected to the wind tunnel via silicone.

      SPECIFICATIONS
      Wind Tunnel
      Accuracy: 1% rdg (2% rdg with restrictive plates)
      Flow Rates: 25 to 9000 fpm (0.15 to 45 m/s)
      Noise: 95 dBA max.
      Size: 1.5 m L x 431.8 mm H (5' x 17")
      Motor
      Power: 120 Vac
      Current: 12 amps
      Speed: 10,000 RPM
      Motor Control Box
      Power: 120 Vac
      Speed Adj.: 10 turn pot.
      Internal Adj.: Min, Max, acceleration and current limit
      Size: 140 W x 184 L x 89 mm H (5.53 x 7.25 x 3.5")
      Weight:
         Wind tunnel: 22.5 kg (49.5 lb)
         Standard elec. 3.2 kg (7 lb)
         Deluxe elec. 7 kg (15.3 lb)












    暂无内容提供
    暂无内容提供

    联系方式

    中国自动化网安全提示，在购买供应商商品时，请一定要先审核好企业信息是否真实，谨防网上诈骗。
    公司名称：Omega工业测量（中国）
    联系人： 王先生
    联系电话：02161973664
    手机号：
    传 真：
    电子信箱：kevin.wang@cn.omega.com
    公司网站：http://cn.omega.com
    公司地址：上海市宜山路1698号102单元
    留言反馈
    • 评价：

    • 关于：

    • 联系人：

    • 联系电话：

    • 联系邮箱：

    • 需求意向：

    • 验证码：

      看不清楚？

    产品分类

    热门产品

    网友反馈

    • 王莹: 在2021/5/22 11:20:43留言
    • 留言内容: 产品名称：热电偶 规格型号：KMQXL-032U-12 品牌：OMEGA 数量：1032
    • 柴宾: 在2019/6/25 14:33:54留言
    • 留言内容: 实验室用
    • 万: 在2017/7/25 16:01:36留言
    • 留言内容: 压差传感器：50psi，px409-050dwu5v 1只 压力传感器：10000Psi，0-5V，PX309系列，接头类型1/4” NPT 1只 压力传感器：2000psi,0-5V,PX409系列，接头类型是1/4” NPT 2只
    • 袁先生: 在2017/4/10 14:46:33留言
    • 留言内容: 需要在滑阀的阀芯末端接上该传感器，反映出滑阀在工作中阀芯所受力的情况
    • 王沛: 在2016/8/28 19:30:28留言
    • 留言内容: 购买温度记录器和热电偶

    公司名称：Omega工业测量（中国）-OMEGA

    公司地址：上海市宜山路1698号102单元 联系电话：02161973664

    版权所有：Omega工业测量（中国）    技术支持：中国自动化网(www.ca800.com)
    服务中心：0755-82912455 Email:service@ca800.com 商务洽谈：0755-82912455 Email:ad@ca800.com 广告垂询：18025374346
    • 在线咨询
    X
    下载企业APP

    成为企业会员免费生成APP!