OM-CP-MOTOR101A Series

The OM-CP-MOTOR101A Seriesmeasures and records on and offstatus changes for motors or otherequipment drawing up to 200 Amps.The state change occurs when thecurrent switch exceeds the 150 mAset point. This allows for most basicequipment to be monitored. Thecurrent switch monitors whetherthere is current passing through awire around which it is attached.

When the current exceeds 150 mA,the output changes and provides avoltage for the
OM-CP-MOTOR101Ato measure. The device can hold upto 406,323 state changes, butmemory will only be used if thestatus has changed. The device canbe programmed to check for statuschanges 4 times per second up toonce every 24 hours.

Data retrieval is simple. Simply plugit into an available USB port and ouruser-friendly software does the rest.The software converts a PC into areal-time strip chart recorder. Datacan be printed in graphical andtabular format or exported to a textor Microsoft Excel® file. The storagemedium is non-volatile solid statememory, providing maximum datasecurity even if the battery becomesdischarged.

Specifications
Amperage Range: 0.15 to 200 A
Trip Point: 0.15A (150 mA) fixed (200 mA AC for 50 Hzoperation)
Status Output (Max): N.O. 1.0 A @ 30 Vac/Vdc
Housing: Split core
Reading Rate: 4 Hz to 1 every 24 hr
Memory: 406,323 readings;software configurable memory wrap
Wrap Around: Yes
Start Modes: Immediate start, delay start up to 18 months,multiple pushbutton start/stop
Multiple Start/Stop Mode: Start and stop the device multiple timeswithout having to download data or communicate with a PC
Multiple Start/Stop Mode Activation:
  To Start the Device:Press and hold the pushbuttonfor 5 seconds, the green LED will flash during this   time; the devicehas started logging
 To Stop the Device:Press and hold the pushbuttonfor 5 seconds, the red LED will flash for three   seconds and thenthe green LED will flashfor twoseconds; the device has stopped logging
Real Time Recording: The device may be used with PC to monitor and record data in real-time
LED Functionality:
  Green LED Blinks: 10 secondrate to indicate logging, 15 second rate to indicate delay start mode
  Red LED Blinks: 10 secondrate to indicate low battery and/or full memory
Password Protection: An optional password may beprogrammed into the device to restrict access to configurationoptions; data may be read out without the password
Engineering Units: Native measurement units can be scaledto display measurement units of another type such as on/off,open/closed and more
Battery Type: 3.6V lithium batteryincluded; user replaceable
Battery Life: 10 years typical,dependent upon frequency and duty cycle
Time Accuracy: ±1 minute/month(at 20ºC/68ºF, stand alone data logging)
Computer Interface: USB (interface cable required);115,200 baud
Software: XP SP3/Vista/7 and 8 (32 and 64-bit)
Operating Environment: -15 to 40ºC (5 to 104ºF),10 to 90% RH non-condensing
Dimensions (Data Logger):36 x 56 x 16 mm (1.4 x 2.2 x 0.6")
Current Switch:54 x 89 x 26 mm (2.1 x 3.5 x 1.0")
Weight: 113 g (4 oz)
  With OM-CP-IFC200: 255 g (9 oz)
Materials: ABS plastic

暂无内容提供

暂无内容提供